Product Information

Break out analog and discrete process, status and diagnostic signals from smart multivariable transmitters and valves; monitor critical and safety-related loops; prevent costly false shutdowns; and warn of unwanted process or instrument fault conditions.

For more information, go to Problem Solvers Application Ideas.

Detailed product data sheets are available in PDF format by clicking on the product names below. PDF files require Adobe Reader, which can be downloaded from Adobe's Web site.

Featured Interface Solutions
Unit
Input
 Output
 Power
 Mounting
 Features

HIM HART® Interface Module


Get Product Information and Installation Tools
 Accepts and "Reads" the HART Digital Protocol Signal that Rides on the 4-20mA Wires of a Smart HART Multivariable Transmitter or Valve
 "Break Out" Analog Signals Representing the Multivariable Transmitter's Primary, Second, Third or Fourth Variables, or Smart Valve Position and Status Parameters
Two or three 4-20mA Signals

Optional Dual Relay Outputs Warn of Unwanted Process Conditions or Diagnostic Problems
High/Low Alarms
(Failsafe or Non-Failsafe)

Two Redundant MODBUS RTU (RS-485) Data Links

Digital Display Shows Process Status and Fault Messages 		24Vdc

High-Density and RFI Resistant
Aluminum DIN-style
(G-type and Top Hat rails)

Convert HART non-primary measurements to analog signals

Works with every HART-compatible device

Dual process and/or diagnostic alarms (optional)

HART-to-MODBUS RTU converter (optional)

Sets up as primary master, secondary master or “listen” mode

Works in “Normal” and “Burst” HART modes

PC-programmable with FREE software and cable

Customizable display shows process status/diagnostics
Unit 
 Input
 Output
 Power
 Mounting
 Features

HCS HART® Concentrator System HART-to-MODBUS Converter


Get Product Information and Installation Tools
 Accepts and "Reads" the HART Digital Protocol Signal that Rides on the 4-20mA Wires of a Smart HART Multivariable Transmitter or Valve
 Converts the HART Digital Signal to serial (RS-485) MODBUS RTU Communication Protocol to allow smart transmitters and valves to interface with MODBUS-based systems. 4-Wire,
Line-Powered
(24Vdc)
 High-Density and RFI Resistant
Aluminum DIN-style (G-type and Top Hat rails)

Convert HART to MODBUS RTU

Works with every HART-compatible device

Monitors primary and non-primary variables

PC-programmable with FREE software and cable

Why Wait? Pull the Trigger NOW! The BULLET® WirelessHART® Adapter by MACTek, and supplied by Moore Industries, enables new and existing wired smart HART field devices, non-smart analog field devices (i.e., 4-20mA) and remote HART I/O from any supplier to communicate with host applications using WirelessHART Technology.

Use The BULLET with our Single and Multi-Channel Smart HART Temperature Transmitters, our HTZ Smart HART Humidity and Temperature Transmitter and our non-smart analog Signal Isolators, Transmitters and Converters. We also offer complete wireless packages that include one or more multiple instruments, an enclosure and the BULLET. 

Get Data Sheet (PDF, 863K)
Unit 
 Input
 Output
 Power
 Mounting
 Features

HIT and HIX 2- and 4-Wire HART® Isolators


Get Product Information and Installation Tools
 4-20mA
input with superimposed HART digital protocol signal
 Isolates Loop, Lets HART Digital Signal "Pass Through"
4-20mA
output with superimposed HART digital protocol signal 		HIT
4-wire line-powered
(24Vdc, 117Vac, 230Vac)

HIX
2-wire loop-powered
(12-42DC)
 Thermoplastic DIN-style
(G-type and Top Hat rails)		 Isolates the analog loop, and lets the HART digital signal “pass through” unaffected